How to change Dynamod and Dynamod Server Socket from 32 bit to 64 bit


Note

  1. If you have a 32 bits system, you are limited to maximum 4GB of RAM, and at most 3.5 of usable RAM. A 64 bits system don't have such limit.
  2. Do not switched to 64 bits if your RAM are lower than 4GB. 64 bits version used more memory than 32 bits does.
  3. Switched DynaMod Server Socket to 64 bits would be good as it has to handle multiple concurrent inquiry.
  4. Switched DynaMod Process Manager to 64 bits would be recommended because from time to time it need to handle large data set process.
  5. Switched DynaMod Client Socket to 64 bits would be recommended because from time to time it need to handle large data set process for synchronization. (Provided you had more than 4GB RAM and better 64 bit Processor and OS)
  6. Switched DynaMod to 64 bits only if you need to extract very large data such as Reporting (General Ledger, Stock Card etc) which generally you are facing 'Out of Memory' exception whenever using 32 bits version.
  7. Running DynaMod 64 bits would be much more slower in some circumstances compare to 32 bits. Such as longer startup time and first time open a particular screen.
  8. For an example: Giving a Lenovo ThinkPad W510 have an i7 intel CPU, that's a 64 bits CPU. The RAM can be extended up to 16Gb. (Only usable if you install a 64 bits OS). So your ThinkPad W510 is capable of running any 64 bits operating system, and ONLY a 64 bits OS can allow you to really access it's full capability.



Dynamod


1) Login to the Dynamod after update and click HELP

2) Select SWITCH FROM 32BIT TO 64BIT VERSION


3) Click YES to confirm the change

 


4) Click CLOSE to close the Dynamod


5) Click SWITCH



6) When login, the version will show is x64




Dynamod Server Socket


1) Open the Dynamod Server Socket and click SOCKET

2) Click on x86 to x64

3) Click YES to confirm if you want to change to 64 bit



4. Click SWITCH for the process to take place. Socket will auto start after switch.




5) Socket will indicate x64 if change is successful





Dynamod Client Socket


1) Open the Dynamod Client Socket and go to HELP

2) Click x86 TO x64

3) Click YES to confirm the change.




4) Click SWITCH



5) Dynamod Client Socket will indicate as x64 if replaced is change is successful